Case Style # 1 Mineral Glass Top & Bottom| | Case Style #1 comes with a plastic movement ring, which allows the case to used with the following 11 1/2 ligne movements: SELLITA SW210-1, SW200-1, SW220-1 also for all the ETA dash 1 and 2 versions of the following 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.40 mm for See-Thru Case #1. Top crystal is 1.3 mm Thick Mineral Glass Diameter 28.8 mm. This case uses a dial with an outside diameter of 28.50 mm and the case has a visible dial opening of 27.5 mm. The distance from the case lug holes on on side of the case to the case lug holes on other side is 39.10 mm, the total distance to the extreme tip of the case lug on on side to the case lug tip on the other is 41.5 mm.
THIS IS A COMPLETE CASE! All complete cases will come with Crystals, Crown and all Gaskets installed already on the case. Our cases are also supplied with a movement ring that allows you to use the above mention movements.
Back side, showing a waterproof 5.5 mm crown and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm. Has dial opening of 27.5 mm.
Crown diameter is 5.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-MG
$62.95
On Sale $57.95
|
Case Style # 1 Sapphire Glass Top & Bottom| | Case Style #1 comes with a plastic movement ring, which allows the case to used with the following 11 1/2 ligne movements: SELLITA SW210-1, SW200-1, SW220-1 also for all the ETA dash 1 and 2 versions of the following 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.40 mm. Top crystal is 1.3 mm Thick Sapphire Glass Diameter 28.8 mm. This case take a dial with diameter of 28.50 mm and has a dial opening of 27.5 mm. 
Back side, showing a waterproof 5.5 mm crown that fits over the 2.5 mm case tube and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm the dial opening is 27.5 mm. Crown diameter is 5.5 mm and case tube diameter for the crown is 2.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-SA
$86.95
On Sale $82.00
|
Case Style # 1 Sapphire Glass with Anti-Reflective Coating| | Case Style #1 comes with a plastic movement ring, which allows the case to used with the following 11 1/2 ligne movements: SELLITA SW210-1, SW200-1, SW220-1 also for all the ETA dash 1 and 2 versions of the following 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.40 mm. Top crystal is 1.3 mm Thick Sapphire Glass Diameter 28.8 mm with Anti-Reflective coating on the underside. See-thru Bottom Crystal is Sapphire Glass. This case takes a dial with diameter of 28.50 mm and has a dial opening of 27.5 mm.
Back side, showing a waterproof 5.5 mm crown that fits over the 2.5 mm case tube and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm the dial opening is 27.5 mm. Crown diameter is 5.5 mm and case tube diameter for the crown is 2.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-ARSA
$89.95
On Sale $84.00
|
Case Style # 1 Sapphire Glass with Anti-Reflective Coating & Screwdown Crown| | The Screwdown crown on this case with work with both manual wind movements and automatic movements. Case Style #1 comes with 1.3 mm thick top sapphire crystal with anti-reflective coating on the inside, 1.10 mm thick bottom sapphire crystal without anti-reflective coating, a plastic movement ring, which allows the case to used with the following ETA and Sellita 11 1/2 ligne movements: For SELLITA SW200-1, SW210-1, SW215-1, SW220-1, For ETA works with all the -1 and -2 versions of the following 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.40 mm. This case take a dial with diameter of 28.50 mm and has a dial opening of 27.5 mm.
Back side, showing a waterproof screwdown 5.5 mm crown and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm. Has dial opening of 27.5 mm.
Crown diameter is 5.5 mm and case tube diameter is 2.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case. The distance from case holes on one side of the case to the other is 39 mm.
Screwdown Crown Sapphire Glass Case
| |
CASE-1-ARSASDC
$102.95
On Sale $91.00
|
Nylon Movement Ring for Case #1
$5.00
Replacement nylon movement ring for Case #1.
|
1.3 mm Thick Mineral Glass Diameter 28.8 mm for See-Thru Case #1
$2.50
Top crystal for See-Thru Case Style #1
|
Set of Top & Bottom Glass Gaskets For the See-thru Back Case
$2.00
|
Top Glass Gasket For the See-thru Back Case
$1.25
Inner Diameter: 28.7 mm. Outer Diameter 29.5 mm. Height: 1.0 mm.
|
Bottom Glass Gasket For the See-thru Back Case
$1.25
Inner Diameter: 25.5 mm. Outer Diameter 26.3 mm. Height: 0.9 mm.
|
O-Ring Gaskets GK-70-2800
$2.10
Cross Section: .70, Inside Diameter: 28.00 mm. Sold in packages of 3 pieces. Price breaks at 6, 12 and 144 packages.
|
Screwdown Crown for Screwdown Cases Style 1 SASDC and 1-MGSDC| |
Replacement crown and tube for cases style 1-SASDC and 1-MGSDC.
| |
SDCRN-CASE1
$9.00
|
Swiss Made Double O-Ring Divers Crown 5.5 mm Tap 10| |
Stainless Steel
Swiss Made Double O-Ring Divers Crown Tube Opening: 2.5 mm, Diameter: 5.5 mm
Post Length: Flush Tap 10, 0.90 mm thread diameter.
| |
CRN-926/10W
$8.40
|
Waterproof Stainless Steel 4.0 mm Crown, Tube 2.5 mm| |
Tube Opening: 2.5 mm, Diameter:4.0 mm, Post Length: Flush
Tap 10 (0.90 stem thread diameter)
| |
CRNWP-309
$5.60
|
Tap 10 Waterproof Crowns White Tube Opening 2.5 mm
|
Dials to Fit SELLITA SW210-1 and ETA 2801
These Dial Fit Case Styles 1, 2, 4, 5 & 6
|
Dials to Fit Case Styles 1, 2, 4, 5 & 6
These Dials Fit SELLITA SW200-1, SW210-1, SW215-1, SW220-1 and ETA 2801, 2824 & 2836
|
Hands, Watches
|
Stainless Steel 10 ATM, 42 mm Cases For SELLITA and ETA Mechanical Watch Movements
New 42 mm Diameter Cases, Water Resistant to 10 ATM
For ETA and SELLITA Swiss Made Movements, SW200-1, SW210-1, SW220-1, ETA 2801-2, 2824-2, 2836-2
|
Watch Case Styles # 4 for ETA 2824-2 & 2836-2 and Sellita SW200-1, SW220-1
Case Style #4 with Solid Back Stainless Steel Case
Case style #4 will accommodate the following mechanical movements ETA 2801-2, 2804-2, 2824-2, 2836-2, Sellita SW200-1, SW210-1, SW220-1. The Miyota 8215 will not fit in any of the cases we supply, since the Miyota 8215 is thicker and will not fit inside any our of cases.
|
Watch Case Style #2 For Quartz Mvt's
For Ronda 515 Swiss Made 11 1/2 Ligne Quartz Movement
|
Make Your Own Watch
It is possible to make your own watches, using the selection of cases, dials and hands we offer.
We have many styles cases with choices of sapphire glass or harden mineral glass along with dials and hands to fit popular ETA & SELLITA Swiss Made mechanical movements 7750, 6497-1, 6498-1, 2824-2, 2836-2, 2804-2, 2801-2 . We also have cases and dials to fit the popular Ronda Swiss Made Quartz Movement Ronda 515. You'll find a large selection of hands, all the straps and tools you need to start assembling your own special watches.
|
