Generic 20 mm by 2 mm Thick Spring Bars to fit Rolex® 23-9291 | Special Spring Bars single shoulder, shoulder to shoulder is 19.63 mm, pivots 2.8 mm long, bar diameter is 2.0 mm, pivot diameter is 1.2 mm. Popular generic spring bars which fits many Rolex cases. Case Number 1019-0, 1675, 5513-0, 9401-0, 9411-0, 9420-0, 9121-0, 9430-0, 14060, 16550, 16570, 16600, 16610, 16613, 16660, 16700, 16710, 16713, 16750, 16753, 16760, 16800, 16803, 74100, 75304, 76100, 79090, 79160, 79170, 79180, 94010, 94110, 94200, 94210, 94300. Swiss Made Spring Bar | |
FB-7895
|
20 MM Spring Bars Flange Ends, 1.8 mm Thick to fit Rolex® | Special flange end spring bars, 1.8 mm diameter, 22 mm from flange end to flange end, 24 mm end to end. Pivot diameter past the flange is 0.90mm and 1.00 mm long. Made to fit 20 mm case lugs. Swiss made assembled by hand in a small village in Switzerland one at a time. | |
FB-7898
|
Swiss Made 1.8 mm Thick 20 mm Spring Bar Replaces Rolex® 23-9290 Spring Bar
|
Double shoulder on one end and single on the other. The body length is 19.65 mm and diameter is 1.8 mm, with pivot diameter of 0.88 and length of 2.0 mm. Made to fit RLX case 1603, 1625, 1018-0,
14270, 1600, 16000, 16003, 1601, 16013, 16014, 1603-0, 16030, 16200, 16203, 16220, 16223, 16233, 16234, 1625-3, 16263, 16264, 5500-0, 5501-3, 5502, 5504-0, 5505-3, 5506-1, 5516-1, 6424-0, 6425-0,
6564, to replace spring bar genuine spring bar 23-9290. Generic Spring Bars MSA Assortment Refill 054 OTTO FREI is not affilated or sponsored by Rolex® Watch U.S.A. The Rolex® Warranty does not apply to generic replacement parts, supplied by OTTO FREI.
| |
FB-7891
|
Swiss Made 1.8 mm Thick Double Flange 20 mm Spring Bar | Double flange style 1.8 mm thick body with pivot diameter 0.90 mm and length of 1.0 mm. This spring bar is made to fit RLX case 15200, 1400, 14000 and can be used on other 19 mm size case lugs.
Also is the same generic spring bar MSA assortment refill 052. Swiss made assembled by hand in a small village in Switzerland one spring bar at a time.
| |
FB-7892
|
20 mm Single Shoulder 1.80 mm Diameter Swiss Made Stainless Steel Spring Bars
$2.80
FB-7978
Length measured from Shoulder to Shoulder
Body Diameter 1.8 mm, Pivots 0.90 by 2.0 Long
Swiss Made, 100% Stainless Steel
|
Swiss Made 20 mm Special End Spring Bar | These special end bars are 20.35 mm from outside of end shoulder to end shoulder, 22.65 from end to end. The bar diameter is 1.8 mm the pivot diameter is 0.85 mm and length 1.0 mm. Same as MSA 46.055-20 refill. Swiss made assembled by hand in a small village in Switzerland one at a time.
| |
FB-7896
|
Gold Tone Special End Spring Bar |
These special end bars are 20.35 mm from outside of end shoulder to end shoulder, 22.65 from end to end and is 1.8 mm in diameter.
| |
FB-7897 $4.00
|
Swiss Made 1.8 mm Thick Double Shoulder 19 mm Spring Bar |
Double shoulder type body length is 18.6 mm and diameter is 1.8 mm with pivot diameter 0.88 that are 2.0 mm long. Another bar made for a RLX case, that would seem to work best with lug sizes 19.5 mm to 20.5 mm. Swiss made assembled by hand in a small village in Switzerland one spring bar at a time. Same as MSA 46.053-19 assortment refill. | |
FB-7893
|
Swiss Made 1.8 mm Thick Double Flange 17 mm Spring Bar | Double flange style 1.8 mm thick body, with pivot diameter 0.90 mm and 1.0 mm long. Made for RLX case 6824 and can be used on other 17 mm size case lugs. Swiss made assembled by hand in a small village in Switzerland one spring bar at a time. Generic Spring Bars MSA Assortment Refill 17 MM
| |
FB-7899
|
Swiss Made 1.8 mm Thick 13 mm Double Flange Spring Bar | Double flange style 1.8 mm thick body, use on 13 mm lugs. Pivot diameter 0.90 mm and 1.0 long. Made to fit RLX case 69160 Generic Spring Bars MSA Assortment Refill 13 mm. Swiss made assembled by hand in a small village in Switzerland one spring bar at a time.
| |
FB-7889
|
Swiss Made 1.8 Thick Single Shoulder 13 mm Spring Bar
| Pivot diameter 0.88 mm and 1.65 mm long. Made to fit RLX case 6916 and Generic Spring Bars MSA Assortment Refill 051. Swiss made assembled by hand in a small village in Switzerland one at a time.
| |
MSA-46051-13
|
Assortment of 8 Spring Bars to fit Rolex®
|
Two each of the four bars shown above (FB-7895 2 mm thick by 20 mm, FB-7898 1.8 mm thick by 20 mm, FB-7891 1.8 mm thick by 20 mm, & FB-7893 1.8 mm thick by 19 mm). | |
FB-7890 $20.60
|
$59.95 $49.95 On Sale!
Assortment of Spring Bars to fit Rolex® | 40 Special Spring Bars 10 different types, 4 each. OTTO FREI.. is not affiliated or sponsored by Rolex© Watch U.S.A. The Rolex® Warranty does not apply to generic replacement parts, supplied by OTTO FREI. | |
MSA-99.120 Regular Price $59.95, now On Sale $49.95
|
The Highest Quality Swiss Made Spring Bars
1.5 mm, 1.8 mm and 2.0 mm thick, from 13 mm to 24 mm Swiss Made
|
Generic Steel Screw Bars To Fit Rolex® Bracelets
|