AWCI Introduction to Basic Quartz & Quartz Chrono

Hand remover for wrist watches, tips will not demage the dial. Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. Bergeon reference #30636-1

FB-400
$69.72
 

This is the finest oil cup stand on the market and is a must have item for any watchmaker. Only a little bit of oil should be placed in each of the agate cups at a time. Oil should be transferred to the cups by large drops from a large oiler or a clean nail. In the center of the stand is pith wood cup for cleaning the oilers. Comes with 4 ruby cups (8mm well).

FB-914
$164.75
 

Bergeon high-quality, Swiss made of nickeled polished brass, baskets for holding small parts. Screw type. Diameter 16 mm. Height 12 mm. If you want to take a chance we can sell you cheaper ones made in India.

FB-311
$41.65
 

Quantity	1 - 2	3 - 5	6 - 11	12+
Price	$41.65	$38.50	$37.35	$36.41

This Double lens Bergeon aplanatic, 10X eye loupe, has good color correction and less distortion compared to the B&L 10X. As in all 10x loupe of this type the focus distance is one inch away from the object. 10x Power loupes are only used for inspection of an object. This loupe has a 1 stamped on it meaning 1" focus meaning 10x power.

FB-610
$46.80
 

For those who don't want to scratch and damage their dials while removing hands, this Bergeon dial protector is the tool to use. It's made of resistant synthetic material. Thickness of 0.15 mm. Color is off white with Otto Frei Logo.

BERG-6938
$1.50
 

Quantity	1 - 9	10 - 99	100+
Price	$1.50	$1.20	$1.00
On Sale!	$1.30	$1.08	$0.91

Slide locking jaws, with chrom.-plated bow and handle. Length: 120 mm.

SLICK-30610-1.00
$64.80
 

Small. Name of the wood : Hornbeam, Scientific name : Carpinus betulus, Country of Harvest : France

123.302
$8.90
 

This inexpensive plastic dust cover and tray may look like a cheese tray, but for the watchmaker, it means clean parts. The segmented bottom separates groups of parts. You can also flip the base and use it as a display tray, the lid will fit nicely.

FB-117
$8.60
 

Some think this is the best set on the market, without a Bergeon name plate on it. These 12 screwdrivers have a newly redesigned stainless steel body with anodized aluminum Swivel Head that sits a top of and canal of Micro Ball Bearings allowing for a very smooth swivel rotation. Comes with 12 spare blades, which can be stored under the center cap of the rotating stand. The rotating stand weighs about 1 1/2 pounds, which is heavier and wider than the conventional rotating stand. The heavy weight and wide stance of the stand helps stabilize the screwdriver set, so that the set won't knock over as easily as other conventional screwdriver sets on rotating stands. The color coded holes help identify your screwdrivers faster. Sizes of screwdrivers are 0.50 mm, 0.60 mm, 0.70 mm, 0.80 mm, 1.00 mm, 1.20 mm, 1.40 mm, 1.50 mm, 1.60 mm, 2.00 mm, 2.50 mm, and 3.00 mm. Non-skid base.

MSA 01.218-E
$399.95
 

Hand fitting press for wrist and pocket watches. Delivered with 8 different nylon screw on stakes stored on the press, spring-loaded for easy use. Equipped with plunger, spring, and screw on stake sizes: 0.50mm, 0.70mm, 0.90mm, 1.20mm, 1.50mm, 1.70, flat, and conical. Stakes are the same ones used in MSA05.017. Product size: 70mm x 70mm x 105mm.

MSA05.021
$118.00
 

Lint-free, anti-tarnish tissue paper, 1,000 5 inch by 5 inch sheets per box. Every watchmaker and Jeweler needs a box of these papers to keep clean parts, rings and other small items. Made in America, this is a superior product to the cheap watch paper made in India found elsewhere on the web.

FB-308
$8.50
 

If you don't have a bottle of D-5 yet, then now is a good time to order some. D-5 is a highly recomended thick oil which can be used on both mechanical and quartz movement. The recommend shelf life of this product is 3 years. Modern ETA oil charts advise you to use when need a thick oil or grease either D5 or the New Moebius 9104 Synthetic Oil Synt-HP 1300.

FB-916
$39.60
 

Moebius Synthetic Oil 9010 has been the standard general purpose oil in the watch industry for decades. Extremely resistant to deterioration, it does not thicken, or clog and it prevents gumming up. MOEBIUS 9010 Synt-A-Lube does not spread, and remains where it is applied for several years. Viscosity of 1.5 stokes at +20 degrees celsius ((viscosity 120 (mm2/sec), provides good lubrication until -29 degrees celsius. Range of temperature: -29 to +70 °C, Viscosity at 20 °C: 150 cSt Pour point: -40 °C, Density at 20 °C: 0,907. Moebius declares the 9010 product in conformity with ROHS and REACH initiatives. The recommend shelf life of this product is 6 years.

FB-917
Moebius Synt-A-Lube (9010) Watch Oil, 2 ml
$27.60
 

Quantity	1 - 11	12+
Price	$27.60	$25.79

Again like number 1841, this is a very normal quality pin vise with two reversible chucks. Opening from 0-2.1, 1.9-3 mm, length 108 mm.

BERG-5860
$21.69
 

Safely and easily removes fingerprints and smudges from all glass and plastic crystals.

Crystal Clean
$9.50
 

For those who don't want to scratch and damage their dials while removing hands, this dial protector is the tool to use.

MSA 70.004
$1.50
 

Quantity	1 - 9	10 - 99	100+
Price	$1.50	$1.20	$1.00
On Sale!	$1.38	$1.08	$0.91

This reversible movement holder for 8 3/4 to 19 ligne movements is an improved version of a Swiss-made classic. Using hardened plastic instead of steel, this eliminates potential scratching of the movement. Holds movements from 19.75 mm to 42.85 mm. Swiss made

MSA 09.104
$23.95
 

This reversible movement holder for 8 3/4 to 19 ligne movements is the Bergeon, Swiss-made classic. Holds movements from 19.75 mm to 42.85 mm. It's as servicable as any other and at a very good price.

FB-807
$27.75
 

Accomodates movements between 3 3/4 and 11 lignes. Holds movements from 8.46 mm to 24.80 mm. Made with hardened plastic to eliminate potential scratching of the movement.

FB-808-P
$25.32
 

When checking details only a 10 power loupe will do. You know the rule, it is considered perfect if you do not see any flaws at 10 power. The 10 power loupe comes in focus at 1 inch.

FB-602
$18.95
 

Made for larger hands on both mechanical movements and chronograph quartz watches. Double sided, on one end the diameter of the hole is 0.80 mm and the other end is 1.50 mm. This tool is a lifesaver and a timesaver and will also help with hole sizes smaller and larger than the listed sizes.

BERG-7404-2
$20.90, Now on Sale $17.95
 

Quantity	1 - 9	10+
Price	$20.90	$18.95
On Sale!	$17.95	$15.98

Double sided, on one end is blue pvc with center pointing and flat tip made in brass on the other end.

BERG-7404-3
$20.90
 

The Bausch and Lomb 4X loupe is the standard of the industry. Due the slightly wider field of view, objects appear a little brighter with the B&L loupe than with a Bergeon Aplanatic Loupe. The 4X power loupe comes in focus at 2.5 inches allowing for you to have the working room to need to repair movements.

FB-603
$16.95
 

Bergeon has discontinued this item. Bergeon Suggest using the Regular Presto # 3 remover coming soon!

NO LONGER AVAILABLE

Second hand remover, excellent for curved countersink dials. Some think that this tool should be used on the small hour and minute hands of today's fine watches. Everyone should have this Presto # 6 model and Presto # 1 to begin with. Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. Bergeon reference #30670-6

FB-405
$74.30 On Sale $63.95
 

Hand remover that removes hands without touching the dial. Great for curved dials, stop watches, movements without dials. Four different spokes with diameters of 0.40, 0.65, 0.90 and 1.15 millimeters. Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. Bergeon reference #30671-7

FB-406
$86.00
 

For use on cannon pinions and for larger pocket watch and small clock hands. Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. Bergeon reference #30637-2

FB-401
$74.64
 

Set of three new double ended hand setting tools, Bergeon Swiss made. Contains 7404-1 (0.50 mm x 1.0 mm), 7404-2 (0.80 mm x 1.50 mm) and 7404-3 (center pointing x flat tip). Comes with a weighted stand to hold the tools when not in use.

BERG-7404-S03
$86.50
 

For removing wheels on third wheel arbors and for chronograph driving wheels with five spokes. Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. Bergeon reference #30638-3.

FB-402
$74.64