Hands for Quartz Clock Movements
Click Here to See the Select of Hands for Quartz Clock Movements
|
High Torque "AA" Cell Quartz Movement
|
AA Battery Quartz Clock Movement, For Dials Up To 6 mm| |
Shaft diameter 5/16" (8 mm), Shaft Length 11/16" (17 mm) For dial thickness up to 3/16" (5mm). Total Shaft length is 9/16" (14 mm).
The AA-Cell mini quartz clock movement is the smallest of the quartz clock movements at 2 7/32" x 2 7/32" x 5/8".
Dial thickness is the maximum thickness the dial or clock housing that the hand shaft can go thru, while still allowing for the nut to hold the movement to be applied on the dial side and for the post of the hands to extending out.
| |
CLK100S
$6.95
|
AA Battery Quartz Clock Movement, For Dials Up To 6 mm| |
Shaft diameter 5/16" (8 mm), Shaft Length 11/16" (17 mm) For dial thickness up to 1/4" (6mm). Total Shaft length is 5/8" (16 mm)
The AA-Cell mini quartz clock movement is the smallest of the quartz clock movements at 2 7/32" x 2 7/32" x 5/8".
Dial thickness is the maximum thickness the dial or clock housing that the hand shaft can go thru, while still allowing for the nut to hold the movement to be applied on the dial side and for the post of the hands to extending out.
| |
CLK100
$6.95
|
AA Battery Quartz Clock Movement, For Dials Up To 6 mm| |
Shaft diameter 5/16" (8 mm), Shaft Length 11/16" (17 mm) For dial thickness up to 3/8" (10mm). Total Shaft length is 13/16" (20 mm).
The AA-Cell mini quartz clock movement is the smallest of the quartz clock movements at 2 7/32" x 2 7/32" x 5/8".
Dial thickness is the maximum thickness the dial or clock housing that the hand shaft can go thru, while still allowing for the nut to hold the movement to be applied on the dial side and for the post of the hands to extending out.
| |
CLK101
$6.95
|
AA Battery Quartz Clock Movement, For Dials Up To 6 mm| |
Shaft diameter 5/16" (8 mm), Shaft Length 11/16" (17 mm) For dial thickness up to 3/4" (19mm). Total Shaft length is 1 1/8" (28 mm).
The AA-Cell mini quartz clock movement is the smallest of the quartz clock movements at 2 7/32" x 2 7/32" x 5/8".
Dial thickness is the maximum thickness the dial or clock housing that the hand shaft can go thru, while still allowing for the nut to hold the movement to be applied on the dial side and for the post of the hands to extending out.
| |
CLK102
$6.95
|
Quartz Clock Push-On Hands Movement with no Bushings QM60| |
Total Shaft length is 5/8" (16 mm), For a Maximum Dial Thickness up to 5/16" (8 mm).
Exclusively for those who have a case back molded to "clip" in the 2 7/32 " (56 mm) sq. by 5/8" (16 mm) thick movement. No hardware needed, just snap in and push on the hands.
Requires 1 AA battery. No Hardware.
| |
QM60
$6.95
|
Quartz Clock Push-On Hands Movement with no Bushings QM65| |
Total Shaft length is 1/16" (4 mm), Maximum Dial Thickness up to 1/8" (3 mm). Total
Exclusively for those who have a case back molded to "clip" in the 2 7/32 " (56 mm) sq. by 5/8" (16 mm) thick movement. No hardware needed, just snap in and push on the hands.
Requires 1 AA battery. No Hardware.
| |
QM65
$6.95
|
