Bergeon 7965-S10 Special Knurled Handle Screwdriver Set with Deluxe Heavyweight Stand
| |
Set comes with 10 stainless steel special knurled handle screwdrivers made to be used with or without the 7965-C demountable dynamometric cylinder (sold separately). The wider body allows a nice grip even when not using the 7965-C demountable dynamometric cylinder. The head is made of Polyoxymethylene (POM) synthetic material and is self-lubricating.
Sizes of screwdrivers are .50 mm, .60 mm, .80 mm, 1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm, 2.00 mm, 2.50 mm, and 3.00 mm. Also comes with replacement stainless steel blades for all screwdrivers.
Special order item. Please allow 4-6 weeks for delivery
| |
BERG-7965-S10
$414.00
|
Bergeon 7965-S12 Special Knurled Handle Screwdriver Set with Deluxe Heavyweight Stand
| |
Set comes with 12 stainless steel special knurled handle screwdrivers made to be used with or without the 7965-C demountable dynamometric cylinder (sold separately). The wider body allows a nice grip even when not using the 7965-C demountable dynamometric cylinder. The head is made of Polyoxymethylene (POM) synthetic material and is self-lubricating.
Sizes of screwdrivers are .60 mm, 0.70 mm, .80 mm, 0.90 mm, 1.00 mm, 1.20 mm, 1.40 mm, 1.50 mm, 1.60 mm, 1.80 mm, 2.00 mm, and 2.50 mm. Newly designed stand has 6 emplacements to fit dynamometric cylinders (sold separately) and a removable container for replacement blades. The removable container has 1 replacement blade of each size inside. The container features a turning cap design that lets you turn to the specific sized blade and remove only that size.
Special order item. Please allow 4-6 weeks for delivery
| |
BERG-7965-S12
$449.00
|
Bergeon 7965-050 Special Knurled Handle 0.50 mm Screwdriver| |
This 0.50 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-050
$24.80
|
Bergeon 7965-060 Special Knurled Handle 0.60 mm Screwdriver| |
This 0.60 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-060
$24.80
|
Bergeon 7965-070 Special Knurled Handle 0.70 mm Screwdriver| |
This 0.70 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-070
$24.80
|
Bergeon 7965-080 Special Knurled Handle 0.80 mm Screwdriver| |
This 0.80 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-080
$24.80
|
Bergeon 7965-090 Special Knurled Handle 0.90 mm Screwdriver| |
This 0.90 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-090
$24.80
|
Bergeon 7965-100 Special Knurled Handle 1.00 mm Screwdriver| |
This 1.00 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-1.00
$24.80
|
Bergeon 7965-110 Special Knurled Handle 1.10 mm Screwdriver| |
This 1.10 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-110
$24.80
|
Bergeon 7965-1.20 Special Knurled Handle 1.20 mm Screwdriver| |
This 1.20 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-120
$24.80
|
Bergeon 7965-130 Special Knurled Handle 1.30 mm Screwdriver| |
This 1.30 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-130
$24.80
|
Bergeon 7965-140 Special Knurled Handle 1.40 mm Screwdriver| |
This 1.40 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-1.40
$24.80
|
Bergeon 7965-150 Special Knurled Handle 1.50 mm Screwdriver| |
This 1.50 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-150
$24.80
|
Bergeon 7965-160 Special Knurled Handle 1.60 mm Screwdriver| |
This 1.60 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-160
$24.80
|
Bergeon 7965-180 Special Knurled Handle 1.80 mm Screwdriver| |
This 1.80 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-180
$24.80
|
Bergeon 7965-200 Special Knurled Handle 2.00 mm Screwdriver| |
This 2.00 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-200
$24.80
|
Bergeon 7965-220 Special Knurled Handle 2.20 mm Screwdriver| |
This 2.20 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-220
$24.80
|
Bergeon 7965-250 Special Knurled Handle 2.50 mm Screwdriver| |
This 2.50 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-250
$24.80
|
Bergeon 7965-300 Special Knurled Handle 3.00 mm Screwdriver| |
This 3.00 mm screwdriver has a special knurled stainless steel handle, made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-300
$24.80
|
Stainless Steel Screwdriver Blades from Bergeon
Stainless Steel Blades developed for today's modern Swiss Watches with stainless steel screws. Try some of the original blades as well, so you can decide which works best for your needs.
|
Bergeon 7965-T Removable Drum| | Designed to be used with the 7965 series screwdrivers (sold separately) for better control and increased force when tightening and loosening screws.
| |
BERG-7965-T
$36.95
|
Bergeon 7965-C10 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 10 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C10
$258.00
Special $228.00
|
Bergeon 7965-C15 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 15 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C15
$258.00
Special $228.00
|
Bergeon 7965-C20 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 20 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C20
$258.00
Special $228.00
|
Bergeon 7965-C25 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 25 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C25
$258.00
Special $228.00
|
Bergeon 7965-C30 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 30 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C30
$258.00
Special $228.00
|
Bergeon 7965-C35 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 35 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C35
$258.00
Special $228.00
|
Bergeon 7965-C40 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers for (sold separately) controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 40 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C40
$258.00
Special $228.00
|
Bergeon 7965-C45 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 45 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C45
$258.00
Special $228.00
|
Bergeon 7965-C50 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 50 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C50
$258.00
Special $228.00
|
Bergeon 7965-C55 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 55 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C55
$258.00
Special $228.00
|
Bergeon 7965-C60 Demountable Dynamometric Cylinder| | This stainless steel dynamometric cylinder mounts onto the 7965 screwdrivers (sold separately) for controlled torque when tightening and loosening screws. When the force that is generated exceeds the rated amount of the cylinder, the excess force will be dispersed by the cylinders rotation, therefore preventing over tightening the screw and snapping the screw head. 60 mNm.
2 cylinders can be mounted onto the same screwdriver to test if the screw has been tightened properly. A watchmaker would use the cylinder with the specified mNm force for the movement to tighten the screw, then use the cylinder with a slightly lower mNm force to check if the screw has been tightened completely. If the screw can be loosened with the lower mNm force, then the screw is not tightened properly.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-C60
$258.00
Special $228.00
|
Bergeon 7965 Series Screwdriver & Dynamometric Cylinder Set in Aluminum Case| |
Premium suitcase in aluminium set comes with 10 screwdrivers with special profile (Sizes: 0.50 mm, 0.60 mm, 0.80 mm, 1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm, 2.00 mm, 2.50 mm and 3.00 mm), tube with 2 stainless steel replacement blades for each screwdriver size, tube with 1 HSS curvature blade for each screwdriver size and 10 dynamometric cylinders (10 nmn, 15 nmn, 20 nmn, 25 nmn, 30 nmn, 35 nmn, 40 nmn, 45 nmn, 50 nmn and 55 nmn).
Handle made of stainless steel with special profile compatible with the 7965-C series cylinder.
Tube with 2 conical blades made of hardened stainless steel 54HRC reference 6899-T.
Tube with 1 parallel blade reference 6895-M, per diameter.
Head made of synthetic material POM self-lubricant.
Can be used also without dynamometric cylinder.
Ø from 0.50 mm to 3.00 mm
10 exchangeable dynamometric cylinders
Stainless steel.
Compatible with all specific. screwdrivers reference 7965-…
Preset, fixed torque: from 10 to 55 mNm.
Bidirectional.
Can be positioned on the whole length of the screwdriver
Possibility to mount 2 cylinders, one for screw control, the other for unscrew control.
Special order item. Please allow 4-6 weeks for delivery.
| |
BERG-7965-PREMIUM
$3,100.00
|
Bergeon 7965-MFP-050 Special Knurled Handle Screwdriver with 0.50 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 0.50 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-050
$28.95
|
Bergeon 7965-MFP-060 Special Knurled Handle Screwdriver with 0.60 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 0.60 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-060
$28.95
|
Bergeon 7965-MFP-070 Special Knurled Handle Screwdriver with 0.70 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 0.70 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-070
$28.95
|
Bergeon 7965-MFP-080 Special Knurled Handle Screwdriver with 0.80 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 0.80 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-080
$28.95
|
Bergeon 7965-MFP-090 Special Knurled Handle Screwdriver with 0.90 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 0.90 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-090
$28.95
|
Bergeon 7965-MFP-050 Special Knurled Handle Screwdriver with 1.00 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 1.00 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-100
$28.95
|
Bergeon 7965-MFP-120 Special Knurled Handle Screwdriver with 1.20 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 1.20 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-120
$28.95
|
Bergeon 7965-MFP-140 Special Knurled Handle Screwdriver with 1.40 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 1.40 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-140
$28.95
|
Bergeon 7965-MFP-150 Special Knurled Handle Screwdriver with 1.50 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 1.50 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-150
$28.95
|
Bergeon 7965-MFP-160 Special Knurled Handle Screwdriver with 1.60 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 1.60 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-160
$28.95
|
Bergeon 7965-MFP-180 Special Knurled Handle Screwdriver with 1.80 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 1.80 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-180
$28.95
|
Bergeon 7965-MFP-200 Special Knurled Handle Screwdriver with 2.00 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 2.00 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-200
$28.95
|
Bergeon 7965-MFP-250 Special Knurled Handle Screwdriver with 2.50 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 2.50 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-250
$28.95
|
Bergeon 7965-MFP-300 Special Knurled Handle Screwdriver with 3.00 Curvature Blade| |
This screwdriver has a special knurled stainless steel handle with 3.00 mm curvature blade (parallel-flanks), made to be used with the 7965-C demountable dynamometric cylinder (sold separately). The screwdriver can also be used without the 7965-C demountable dynamometric cylinder. The self lubricating head is made from polyoxymethylene (POM).
| |
BERG-7965-MFP-300
$28.95
|
Bergeon Replacement Curvature Screwdriver Blades
Sizes: 0.50, 0.60, 0.70, 0.80, 1.00, 1.10, 1.20, 1.30, 1.40, 1.50, 1.60, 1.80, 2.00, 2.20, 2.50, 300 mm.
|
