Case Holders, Watch

This is the standard case holder in the industry, and is the best by far. Made of a hard nylon material that will not break, and since it is nylon, it should not mark the case. The four pins are adjustable to hold a small ladies cases to all but the most monster sizes of the men's cases. Bergeon lists that this holder has a maximum capacity of 35 MM, but we have been able to fit our 41 mm case onto the holder. We have also tested cases up to 44 mm in diameter. Once you have the case locked into the Bergeon 5090 case holder, you now have to tighten the 5090 in a your shop vise. Locked in place in your shop vice you can now use two hands when using a case wrench to open the case back. Although the pins are made of nylon and claims to be mar-proof, there is a chance it can scuff the case. Many watchmakers have used wax paper, cellophane, and a variety of cloths when fitting the case into the holder to protect their expensive piece. To make things easier, Bergeon has introduce the Universal Protection Sheet and Microfiber Cloth for added protection.

FB-200
$63.48

 

This Jaxa case holder is for the really big ones. As you can see, it can hold a much larger watch than the one shown in the photo. If the big ones cross your bench, then you know you need one of these. You can put cases up to 66 mm in diameter in this holder and if you had to hold an 18 mm diameter case, well you can still use this extra holder. Although the pins are made of nylon and claims to be mar-proof, there is a chance it can scuff the case. Many watchmakers have used wax paper, cellophane, and a variety of cloths when fitting the case into the holder to protect their expensive piece. To make things easier, Bergeon has introduce the Universal Protection Sheet and Microfiber Cloth for added protection.

FB-202
$146.00
 

Each chuck is adjusted by its own knob, which allows a firm hold and whatever you need to get a firm hold on. Place it in a vice or use it on your bench top. The chucks are the same hard nylon used in the Jaxa holders while the body is made of steel. Will hold cases up to 43 mm in diameter. Although the pins are made of nylon and claims to be mar-proof, there is a chance it can scuff the case. Many watchmakers have used wax paper, cellophane, and a variety of cloths when fitting the case into the holder to protect their expensive piece. To make things easier, Bergeon has introduce the Universal Protection Sheet and Microfiber Cloth for added protection.

FB-232
$136.00
 

Metal case holder with 4 nylon dies. Size: 83mm x 65mm. Will hold cases up to 43 mm in diameter. Although the pins are made of nylon and claims to be mar-proof, there is a chance it can scuff the case. Many watchmakers have used wax paper, cellophane, and a variety of cloths when fitting the case into the holder to protect their expensive piece. To make things easier, Bergeon has introduce the Universal Protection Sheet and Microfiber Cloth for added protection.

MSA-08.002
$94.50
 

For use when opening screw back cases. Rubber suction base hold firm and is ideal for desk/counter top use. Can hold cases from 22 - 70 mm.

S-212
$198.60
 

This Swiss-made Bergeon case holder is for watches with lug widths of 9, 10, 11, 12, and 14 mm. Held in bench vice. made of plastic material which cannot scratch the cases.

FB-203
$42.95
 

A very inexpensive piece. It has been around for many many years. Watchmakers have been using this item for a very long time. It's a nice tool to have around.

159.086
$5.95, On Sale $4.65
 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm.

BERG-5395-55
$39.50

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm.

BERG-5395-75
$43.32

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm. Black in color.

BERG-5395-55-N
$39.50

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm. Black in color.

BERG-5395-75-N
$43.32

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 55 mm. White in color.

BERG-5395-55-B
$39.50

 

Soft gel case cushion designed to slightly contour and not scratch the watch case. Has a diameter of 75 mm. White in color.

BERG-5395-75-B
$43.32

 

This new case cushion has a 90.00 mm diameter to hold larger cases. It stands 15.00 mm tall and has a built in slot for small parts while taking apart your piece. Treat yourself with this latest creation from Horotec, great for all watchmakers and hobbyist alike. NOW COMES WITH PROTECTIVE SEE-THRU COVER WITH KNOB!

MSA 09.305
$39.95
 

This Case Cushion is wrapped around with a plastic ring. The diameter of this piece is 56.2mm.

MSA 09.303
$23.95
 

For use on integrated bands. Helps holding band apart so it won't obstruct your view, allowing you to use both hands while working on the piece.

MSA 10.007
$48.90
 

The Bergeon universal protection sheet can be used in many ways to protect your watch during repairs. Due to the flexibility and durability of the sheet, the sheet can be placed on top of the hands during removal to protect the dial and hands. The sheet can also be placed on the case back to prevent scratching by the case opener. Diameter of the sheet is 60mm. Swiss made.

BERG-7982-60
$3.70
 

Quantity	1 - 2	3 - 19	20 - 99	100+
Price	$3.70	$3.38	$2.80	$2.35

The Bergeon universal protection sheet can be used in many ways to protect your watch during repairs. Due to the flexibility and durability of the sheet, the sheet can be placed on top of the hands during removal to protect the dial and hands. The sheet can also be placed on the case back to prevent scratching by the case opener. Diameter of the sheet is 85mm. Swiss made.

BERG-7982-85
$3.70
 

Quantity	1 - 2	3 - 19	20 - 99	100+
Price	$3.70	$3.38	$2.80	$2.35