Crystal Accessories

This cement hardens when exposed to a UV light source. Best used to glue magnifying lens to mineral glass crystals, since it dries completely clear. Hardens when exposed to sunlight or a UV light. 2 ml bottle

FB-2200
$7.95
 

Used for activating and curing ultraviolet glue and epoxy for crystal assembly such as setting of watch crystals and other jewelry repairs. UV lamp for UV glue, always protect your eyes for the rays of the lamp. 110-127 volt, 60HZ, 8 Watts.

FB-2201
$39.95
 

GS crystal cement is designed to work with both plastic and glass watch crystals, and comes with a pin-point hypo needle applicator.

FB-2202
$6.25
 

Supper fast Jewelers Epoxy Sets in 4 Minutes and Maximum Strength is reached at One Hour!

CE-451
$5.60
 

This new pen with sockets in different shapes is ideal for cleaning watch glasses in the incoming as well as final quality control without touching the watch case. Can also be used for cleaning dials and hands without leaving any marks. Also very helpful on precious stones. It results a better brilliance of this materials after rubbing than any other cleaning cloths or swabs. Outside of the watchmaker branch, the pen can be used for cleaning the loupes. Equipped with the 7971-A Round Concave Tip for domed crystals. Click here for a demo of item.

BERG-7971
$31.20
 

Equipped with the 7971-MINI-C Round Flat Mini Sized Tip for cleaning flat crystals, hands, and dials.

BERG-7971-MINI
$31.20
 

Diameter of tip is 12 mm

BERG-7971-A
$15.45
 

BERG-7971-B
$15.45
 

Diameter of tip is 12 mm

BERG-7971-C
$15.45
 

Diameter of tip is about 5 mm.

BERG-7971-MINI-C
$15.45
 

Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.

MSA 26.177
$18.95
 

This is what the pros use and scratches on plastic crystals are removed in seconds, when it is applied to a buffing wheel and lightly buff. Extreme care must be used and if you have an emotional attachment to the watch, then this is not a product for you. Only use on a bench top buffing wheel and with the crystal still in the case using two hands gently place in front on the outer hairs of the fast spinning buffing wheel for just a few seconds. Too much pressure and you will burn a hole in the crystal this also only takes a second to happen. If is not advised to use a Dremel type hand tool, since all it takes is one slip and the crystal is destroyed.

CE-415
$12.95
 

Bergeon crystal lift for removing and installing any plastic crystal without tensioning ring. Jaws open from 10 mm to 45 mm. Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal.

FB-2210
$89.00
 

Small. Name of the wood : Hornbeam, Scientific name : Carpinus betulus, Country of Harvest : France

123.302
$8.90
 

Removes scratches from plastic watch crystals. Apply a small amount and polish with a cotton cloth. Two tubes for the price of one, with a suggested retail of $7.95 to $10.95 per tube.

PS-47001
$10.95
 

Removes small and medium scratches from watch crystals made of real glass. Versatile use: watches, smartphone, car, furniture, household, window, etc. (do not use for eyeglasses or optical lenses, coated surfaces, and Tablet PCs.) Features a 2-Component-System: Step 1 - the High-Tech Diamond „Repair-Polish“ removes the scratches. Step 2 - the "Diamond Finishing-Polish" polishes to a high gloss. This kit will help save money from expensive repairs. Suitable for all glass qualities. For approx. 30 to 40 applications.

MSA 26.499
$19.95
 

Sometimes the case back does not screw off or snap off and the only way to gain entrance to the watch movement is thru the crystal. The watch would then have what is know as a two-piece stem and crown and after you removed the crown you just insert this pump into the hole and pump away until the plastic crystal pops off the case. To Remove crystals quickly and safely. Available with 3 heads: diameter at 1.60, 2.00, and 2.50mm. 1 key for removing the half-stem with the crown.

BERG-5011
$181.00
 

Epoxy 330 is fast and strong, great for glass watch crystals and is used for repair and stone setting by Jewelers as well. Thickens is 15 minutes and hardened in 2 hours.

FB-2203
$5.95
 

Every Watchmaker's work bench should have one of this lamp. It gives more than enough light to cover your benches surface. It uses three T5 14W fluorescent light bulbs, comes with electronic ballast and On/Off switch. The dimension of the piece are 91cm (35.8 inches) arm length, 61cm (24 inches) head length, and 11cm (4.3 inches) head width. The color is white and uses 110V/60Hz voltage.

FB-13.110
$79.95