Case Openers For Watches

This set is a Jewelers dream for watch battery replacing and for bracelet changing and sizing. Comes with 18 specialized tools and accessories in a hard plastic travel case. Everything you need to open cases, install batteries along with all you need to size, install and remove bracelets: Steel spring bar tool (6767-S), jaxa mini case wrench with square pins (2819-MINI), watchmakers pocket/case knife (7403), 4x eye loupe (2611-2.5), non-magnetic tweezer #00 (7026-00) 2 stainless screwdrivers and replacement blades 1.00mm and 1.60mm (30081-100, 30081-160, 6899-M-100, 6899-M-160), plastic battery tweezer with steel lip (6460-P), screw type bacelet pin remover (7230), flat nose plier (2510-N), microfiber cleaning cloth (7039), flexible bracelet gauge (6789) 1 spare fork tip for spring bar tool 6767-S (6767-A) , 1 spare pin tip for spring bar tool 6767-S (6767-B), 1 plastic tube (30080-TN). Click here to order the tools individually.

BERG-7812
$316.00
 

Set of three dies only without the handle, which will fit in your Bergeon 5700 and Horotec FB-236 case openers. Dies diameter: 25mm, 30mm, and 33mm.

FB-258
$129.95
 

Sometimes the case back does not screw off or snap off and the only way to gain entrance to the watch movement is thru the crystal. The watch would then have what is know as a two-piece stem and crown and after you removed the crown you just insert this pump into the hole and pump away until the plastic crystal pops off the case. To Remove crystals quickly and safely. Available with 3 heads: diameter at 1.60, 2.00, and 2.50mm. 1 key for removing the half-stem with the crown.

BERG-5011
$181.00
 

Ball bearing handle with right sided vice (clockwise spin). Polishing system developed for the watch industry and particularly for finishing watch cases. This tool includes a vice with 4 brass jaws (tightening from diameter 14 to 34 mm) mounted on ball bearings to allow polishing without the risk of any flattening on the item being worked on (watch cases, bezel, case back, ring, etc.). As soon as the item comes in contact with the brush, the polisher starts turning at the same speed as the brush. Special order item. Please allow 4-6 weeks for deliver.

MSA 23.501
$849.00
 

Ball bearing handle with left sided vice (counter clockwise spin). Polishing system developed for the watch industry and particularly for finishing watch cases. This tool includes a vice with 4 brass jaws (tightening from diameter 14 to 34 mm) mounted on ball bearings to allow polishing without the risk of any flattening on the item being worked on (watch cases, bezel, case back, ring, etc.). As soon as the item comes in contact with the brush, the polisher starts turning at the same speed as the brush. Special order item. Please allow 4-6 weeks for deliver.

MSA 23.502
$849.00
 

This polishing tool is used for finishing watch cases, bezels, rings, case backs and more. Equipped with 4 brass jaws that opens from 25 mm to 50 mm in diameter to handle larger case backs. Manual Use: Attach item to polish onto the jaws. Hold tool on one hand and polish piece with a cleaning cloth with the other without ever touching the item. Gently lay down the item onto a clean cloth and loosen the jaws to release the piece. Motor Use: Attach item to polish onto the jaws. Fix the tool onto a 13.90 mm polishing motor arbor and tighten it with 2 screws using the provided hexagonal key. Make sure all parts are safely tighten before turning on the machine. While motor is spinning, apply buff or cleaning cloth gently onto the piece to polish as desired. Special order item, please allow 4-6 weeks for delivery

MSA 23.503
$289.95
 

The Bergeon universal protection sheet can be used in many ways to protect your watch during repairs. Due to the flexibility and durability of the sheet, the sheet can be placed on top of the hands during removal to protect the dial and hands. The sheet can also be placed on the case back to prevent scratching by the case opener. Diameter of the sheet is 60mm. Swiss made.

BERG-7982-60
$3.70
 

Quantity	1 - 2	3 - 19	20 - 99	100+
Price	$3.70	$3.38	$2.80	$2.35

The Bergeon universal protection sheet can be used in many ways to protect your watch during repairs. Due to the flexibility and durability of the sheet, the sheet can be placed on top of the hands during removal to protect the dial and hands. The sheet can also be placed on the case back to prevent scratching by the case opener. Diameter of the sheet is 85mm. Swiss made.

BERG-7982-85
$3.70
 

Quantity	1 - 2	3 - 19	20 - 99	100+
Price	$3.70	$3.38	$2.80	$2.35

This master service set is truly a must have set for watch battery service, watch bracelet changes, length setting, opening and closing of screwed waterproof watch back covers. Comes with 46 specialized tools and accessories in a hard plastic travel case: Full size Jaxa case wrench (Bergeon 2819-08), 4 sets of 3 bits for the Jaxa case wrench (Bergeon 2819-A, 2819-B, 2819-C, 2819-D), multifunction bracelet press (Bergeon 8745), bracelet holder block (Bergeon 6744-P), 4x loupe (Bergeon 2611-TN-2.5), plastic tweezers with steel lip (Bergeon 6460-P), anti-magnetic, stainless steel tweezers (Bergeon 7026-1), 5 stainless steel screwdrivers 1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm and 2.00 mm (Bergeon 30081-100, 30081-120, 30081-140, 30081-160, 30081-200), 5 tubes with 2 spare screwdriver blades (Bergeon 6899-T Ø1.00 mm, 1.20 mm, 1.40 mm, 1.60 mm and 2.00 mm), snap back case knife (Bergeon 4932), flat nose pliers (Bergeon 2510-N), microfiber cloth (Bergeon 7039), flexible measuring band for wrists (Bergeon 6789-N), spring bar tool (Bergeon 3135), spare pin & fork ends for 3135 spring bar tool (Bergeon 3153-R), leather buff stick with buff protector (Bergeon 1282A & 4056-6), steel ruler (Bergeon 2819-08-R), 6 plastic boxes Ø15 x 30mm (Bergeon 2963-B), and dust blower (Bergeon 30540) Click here to order the tools individually. Special Order Item. Please allow 4-6 weeks for delivery.

BERG-7815
$949.00
 

This polishing tool is used for finishing watch cases, bezels, rings, case backs and more. Equipped with 4 brass jaws that opens from 14 mm to 34 mm in diameter to handle larger case backs. Manual Use: Attach item to polish onto the jaws. Hold tool on one hand and polish piece with a cleaning cloth with the other without ever touching the item. Gently lay down the item onto a clean cloth and loosen the jaws to release the piece. Motor Use: Attach item to polish onto the jaws. Fix the tool onto a 13.90 mm polishing motor arbor and tighten it with 2 screws using the provided hexagonal key. Make sure all parts are safely tighten before turning on the machine. While motor is spinning, apply buff or cleaning cloth gently onto the piece to polish as desired.

MSA 23.500
$279.95