Bergeon Collet Tool (G) 30017G| | This tool allows installation of balance spring collets on the balance shaft with one end, and precise rotation of the collet with the other end. The hole diameter (to accomodate the balance shaft) is 0.70 millimeters on this (G) part. Available in other sizes, see below. These tools make adjustment of beat as simple as possible and are worth investing in. | |
FB-234
$55.44
|
Bergeon Collet Tool (M) 30017M| |
This tool allows installation of balance spring collets on the balance shaft with one end, and precise rotation of the collet with the other end. The hole diameter (to accomodate the balance shaft) is 0.55 millimeters on this (M) part.
| |
FB-733
$55.44
|
Bergeon Collet Tool (P) 30017P| |
This tool allows installation of balance spring collets on the balance shaft with one end, and precise rotation of the collet with the other end. The hole diameter (to accomodate the balance shaft) is 0.45 millimeters on this (P) part.
| |
FB-732
$55.44
|
Bergeon Collet Tool (TP) 30017TP| |
This tool allows installation of balance spring collets on the balance shaft with one end, and precise rotation of the collet with the other end. The hole diameter (to accomodate the balance shaft) is 0.35 millimeters on this (TP) part.
| |
FB-731
$55.44
|
Bergeon Collet Tool (TTP) 30017TTP| |
This tool allows installation of balance spring collets on the balance shaft with one end, and precise rotation of the collet with the other end. The hole diameter (to accomodate the balance shaft) is 0.25 millimeters on this (TTP) part.
| |
FB-730
$55.44
|
Bergeon Cutter for Regulating #1844-21| | Slip movement supplied with one .75 mm high-speed steel, oversized shank twist drill. | |
FB-718
$46.20
|
Bergeon Hairspring Levers 30013| | Width of levers is 1.7 mm, 0.2 mm larger than FB-773, which is 1.5 mm | |
BERG-30013
$83.28
|
Bergeon Balance Holder 30106, REPLACED BY 30110| | Tool with holes for balances in nickel-plated brass and is 35 mm in diameter. | |
FB-130
$61.80
|
Bergeon Delrin Balance Holder 30106-D, REPLACED BY 30110-D| |
Tool with holes for balances in Delrin and is 36 mm in diameter.
| |
FB-130-DELRIN
$52.78
|
Bergeon 5482 Pivot Rounder| | The rounding part of the tool is jewelled and should be used with a lubricant. I've heard others say that this tool can be used with Diamantine or similar product to round the tips of balance pivots.
| |
BERG-5482
$116.30
|
Bergeon Hairspring Holder 30105, Replaced By 30108| |
Brushed stainless steel setting round, glass top, ring diameter 35 mm, hole diameter 3.5 mm.
| |
BERG-30108
$87.36
|
Bergeon Hairspring Holder 30108-A| | With glass top and Chromium-plated. Center hole is 4.5 mm in diameter.
| |
BERG-30105-A
$87.36
|
Bergeon 7995 Balance Bridge Support "Balance Tack"| |
Enables the watchmaker to position the balance bridge with his balance-spring, while avoiding polluting the staff pivot with oil. Simply place the balance bridge screw hole through the brass spike and now you can easily make any corrections, inspections or repairs. Swiss made.
| |
BERG-7995
$27.85
|
Balance Tack| | Just slip the cock over the pin tip with the balanced still attached. A balance tack is a fast and simple holder of collet that everyone should have.
| |
FB-105
$15.25
|
Bergeon Tool For Straightening Banking Pins 1856-A | | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.28 mm.
| |
1856-A
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-B| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.30 mm.
| |
1856-B
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-C| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.32 mm.
| |
1856-C
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-D| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.35 mm.
| |
1856-D
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-E| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.38 mm.
| |
1856-E
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-F
| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.40 mm.
| |
1856-F
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-G| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.42 mm.
| |
1856-G
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-H| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.45 mm.
| |
1856-H
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-I| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.48 mm.
| |
1856-I
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-J| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.50 mm.
| |
1856-J
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-K| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.52 mm.
| |
1856-K
$76.95
|
Bergeon Tool For Straightening Banking Pins 1856-L| | Without removing the cock or balance, you now can straighten banking pins. The point will be used for verifying sideshake of rollers and horns. Size 0.55 mm.
| |
1856-L
$76.95
|
Broaches For Hairspring Collet 0.50 mm| |
Black knurled handle. Measures 98 mm in length.
| |
MSA03.101-05
$29.60
|
For Turning and Setting Hairspring Collets Ex. ø 1.10 mm, Hole ø 0.45 | |
Black knurled handle. Exterior diameter: 1.10, Hole diameter: 0.45 mm, Length: 95 mm.
| |
MSA03.102-11
$45.00
|
For Turning and Setting Hairspring Collets Ex. ø 1.60 mm, Hole ø 0.55 | |
Black knurled handle. Exterior diameter: 1.60, Hole diameter: 0.55 mm, Length: 95 mm.
| |
MSA03.102-16
$45.00
|
For Turning and Setting Hairspring Collets Ex. ø 2.10 mm, Hole ø 0.75 | |
Black knurled handle. Exterior diameter: 2.10, Hole diameter: 0.75 mm, Length: 95 mm.
| |
MSA03.102-21
$45.00
|
Horotec Lever For Hairspring Collets 03.103-C
| |
Size: Width 2.50 MM, Length 1.15 MM. Nickel-plated brass knurled handle for firm grip.
| |
MSA-03.103-C
$59.95
|
Horotec Lever For Hairspring Collets 03.103-D
| |
Size: Width 3.00 MM, Length 1.20 MM. Nickel-plated knurled handle for firm grip.
| |
MSA-03.103-D
$59.95
|
Horotec Lever For Hairspring Collets 03.103-E
| |
Size: Width 1.80 MM, Length 0.95 MM. Nickel-plated knurled handle for firm grip.
| |
MSA-03.103-E
$59.95
|
Bergeon 7990 Support for Cleaning the Impulse Pin| |
Allows stable support of the balance complete without damaging the hairspring when cleaning the impulse pin.
| |
BERG-7990
$19.40
|
Bergeon 31081-TETC ETA Chron Regulator Adjusting Tool| | Screwdriver with blade to turn out ETACHRON Pitons. Fine adjustment of the spiral centering between the racket pins. Has small opening at the tip for adjusting the regulator pins. Overall length: 3.75 inches.
| |
BERG-16918-TETC
$34.95
|
Bergeon 31081-EETC ETA Chron Stud Removing Tool| | Screwdriver with blade to remove ETACHRON Pitons. Has small fork shaped tip for removing the stud block. Overall length: 3.75 inches.
| |
BERG-16918-EETC
$39.95
|
Bergeon 4072 Pin Vise for Holding HairspringsFB-742
$52.20
|
Bergeon Polystyrene Red Stick| | Polystyrene stick with pointed end on one side and flat end on the other. Length is 135 mm with 4 mm diameter.
| |
BERG-6436
$3.49
|
Collet Tools & Roller Removers
|
